Hey Eric, thanks for reaching out and providing photos!
You definitely can swap out the 6-Way socket that comes with the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord # BX88206 for the plug on your Mopar 82211156AC wiring harness so you can get your 2012 Jeep Wrangler back up and running. I was able to find some information regarding the pinout on your Mopar connector so I'm going to tell you which wire in your photo should carry which function, and then you can use the linked photo... view full answer...
Thanks for the pictures and all of the detailed information! The Driver's Side Voyager RV Side Camera item # VCMS12LGPR and the Passenger Side item # VCMS12RGPR both use the same 4-pin connector that the older Voyager VOM-73SNWIN used.
I have attached a picture below of the connector. I recommend verifying that's the same one as you are currently using. view full answer...
Hey Paul,
For a 2024 Ford Bronco Black Diamond the harness is going to vary depending on tail lights. I'm assuming you likely have LED's but we'll also need to see if you have variable voltage wiring. Variable voltage tail lights use the same wire for the brake signal and running lights instead of the standard turn/brake wire setup. To determine if you have variable voltage tail lights you'll need to pull the tail light out to get to the wiring and test wires with a probe tester # PTW2993... view full answer...
Go To Results